Furnace Repair

Reliable Furnace Repair Service in San Diego, CA

Are problems with your furnace burning you up? Trust us to keep your home snug and your temper cool today!

The winter weather in San Diego, CA, is no stranger to temperatures under 20 degrees. Even with a midday high of a tolerable 45 degrees, your home can stubbornly trap the frostier weather. To ensure the uncomfortable indoor climate doesn’t stick around for long, ensure that your furnace is in proper working condition all year round.

Even the simplest unseen issue can abruptly halt your heating and cooling system’s power. So, whether you’re interested in a maintenance check or a flat-out furnace repair, trust Pacific Breeze Heating & Air to keep your furnace running smoothly.

How to Tell When You Need Furnace Repair Services

You may be committing to yearly furnace inspections that have kept your furnace functioning properly thus far, but what if something happens between check-ins? Even with efficient heating cycles that leave your home pleasantly warm, there’s no guarantee your furnace is up to par.

Below are some tell-tale signs that’ll help you detect imperfections in your furnace that can damage your entire HVAC system.



Unusual Noises

While any noise from a furnace may seem alarming, it’s not unusual to hear a few noises during operation. Clicking sounds signal the beginning and end of each cycle from the pilot light and thermostat, for example, and are simply burners turning on before the system powers off again. However, these clicking sounds shouldn’t last more than a minute.

You may also hear a slight humming coming from the furnace burner. This humming may be like an air conditioner or HVAC unit in tone. Since it’s the blower’s responsibility to transmit hot air into the ducts that will travel into your living quarters, a soft buzzing from the motor is expected.

However, don’t overlook it if your blower motor draws more attention with louder or harsh new sounds. These sounds can mean that your blower motor is run down and needs replacing:

Grinding
Clanking
Rattling
Squealing

Squealing can also signify bearing issues or an old, loose fan belt. Other ways to tell it’s time for a furnace repair include:

– A constant clicking sound, meaning either the flame sensor or the pilot light is malfunctioning.
– A clicking sound that continues once the cycle begins, indicating a bad control panel or faulty circuit board.
– An explosive sound, which can indicate various issues from mild to severe.



Inadequate Heating Power

A poorly heating furnace has many potential causes. For example, unsecured or damaged air ducts can leak air before it reaches chilly rooms. Not only will unfiltered, cold air enter your home, increasing health risks, but your system will work harder to produce the temperature set by the thermostat. This stress on the furnace system produces poor heating and air quality and increases energy costs.

Additionally, dirty filters can clog the passageways through which air enters ductwork. A dirty blower motor or heat exchanger can also limit the efficiency of your system.

Next, malfunctioning thermostats may fail to turn on the furnace or alter the furnace’s temperature settings. Fortunately, these parts are easy to inspect and may cost less to repair than the furnace itself.

Finally, if all furnace and thermostat parts are in working condition, the size of your furnace may be the culprit. A system that is too small for a designated indoor space will not generate enough heating power. Conversely, a too-large system for your home will produce more energy than you need.



Short Cycling

When your furnace is in proper working condition, you can expect it to turn on for up to 15 minutes. As it nears this 15-minute mark, your home should be warm, and your furnace should turn off until its next cycle. On average, your furnace should cycle up to three times in one hour.

However, anything more or less in cycle duration or cycling quantity indicates the need for a furnace repair or replacement. Some repairs you can handle yourself, such as a filter replacement. This simple action can prevent the chambers from overheating and the limit switch powering down the system. You can also change the thermostat batteries if the thermostat is giving wrong readings.

For other concerns, though, you should contact an expert furnace repair service like the team at Topline Heating & Repair for any of the following short cycling causes:

– An overheating heat exchanger
– A faulty limit switch, run capacitor, or flame sensor.
– An incorrectly sized furnace that needs replacing.

Why Choose Pacific Breeze Heating & Repair?

Pacific Breeze Heating & Repair is a dedicated heating installation & repair service. Our five-star customer reviews across Facebook, Google, and Yelp reflect not only the quality of our services but the friendliness of our staff and affordable prices, as well.

Our top-of-the-line service begins with a qualified and motivated group of technicians that love their jobs. Our team enjoys assisting California residents with heating and cooling air services, and we’ve had the honor of being recognized as one of the best places to work in California in 2021.

Our friendly technicians work with you to achieve your indoor comfort goals and are backed by industry-standard warranties. So, whether you call in for an AC or a heating system, including an electric or gas furnace, you can rely on us.

Our team also understands that sometimes a problem can’t wait until the other heater repair servicers get back on duty. Unlike many competitor services, we’ll be there to receive your call 24/7, year-round.

Whether you need a second opinion on a small heating concern or need fast repairs on a poorly timed furnace breakdown, we’ve got the affordable services you need. Schedule a meeting or call for emergency services anytime.

Our Emergency Services

If you’re looking for “furnace repair near me,” look no further than Pacific Breeze Heating & Air. From a regular heating repair to an emergency furnace repair, we’ve got you covered.

That means dispatching a technician the moment you need one. Your technician will listen to your concerns, examine the system, and give you an answer. Your technician will create an itemized list of concerns, from the circuit breaker to motor blower issues, and relay furnace repair costs accordingly.

Once they’ve fixed the problem, we guarantee your furnace repair or replacement will leave you with years of quality heating ability.

FAQs About Furnace Repairs

Understanding the ins and outs of furnace repair services can be a bit much. To help break down some common concerns, here are the answers to some frequently asked questions we receive.

What do you call a person who fixes furnaces?

An HVAC technician, also known as a heating, ventilation, and air conditioning expert, is a qualified worker who replaces and repairs furnaces.

Why is my furnace running but with no heat?

Several things can cause your furnace to produce no heat when running. Dust, dirt, and grime from the air can block the airflow in the filters. These blockages can lead to the chambers or heat exchanger overheating and short cycling.

While cleaning the filters on your system can be a quick fix, feel free to contact a specialist like those at Topline Heating & Air to walk you through the steps. We’ll also come over to examine other possible issues, such as a problematic thermostat, exchanger, or pilot light on a gas furnace.

Why is my furnace not turning on?

If your furnace isn’t turning on altogether, the cause could be the flame sensor or ignitor. You can usually tell if those are the problem if you hear an unwavering clicking sound as a cycle begins.

You may also have a broken or clogged component restricting the warm air, including a worn blower motor, pilot light, or thermostat.

Does HVAC repair furnaces?

HVAC companies specialize in heating and cooling systems as well as ventilation. That means, for a company like ours, furnace repairs are one of the top priorities.

At Pacifc Breeze Heating & Air, we specialize in furnace maintenance, repairs, and replacements for electric and gas furnaces alike. No matter the age of your equipment or the brand, our technicians have experience dealing with all makes and models.

How often should my furnace be serviced?

Although experts claim you should service your furnace once a year, we suggest servicing your system bi-yearly. Having a technician do an overall check before the cold steps in and then again in the spring will prove optimal.

During these checks, your technician will also point out potential issues and clean dirty components before they become more significant concerns.